GE Pro Elite RO-450 Water System Parts Filters Replacements & Membrane Cartridge

Stage 1-

• Sediment cartridge is the first filter installed in the GE Pro Elite RO-450 Reverse Osmosis filters systeme .
• The main function of a sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. Removal of such particles allows for a better performance of all the following filters, such as Carbon Block or GAC filters.
• Micron rating: 5 Micron.
• Dimensions: 9.75" x 2.5"
• Lifetime: Replace every year, depending on the water quality.

This GE Pro Elite RO-450 Filter is wrapped and sealed and meets NSF Standards and Regulations. Filter will fit any Residential Reverse Osmosis Unit that features standard 10” filter housing For GE Pro Elite RO-450 Revers osmosis water filters

 

Stage 2-

•  Activated Carbon Block Filter are made of fine coconut shell carbon 
• remove odors and tastes of many organic compounds, chlorine especially. Though, because this filters are made of a packed carbon (forming a cylinder block), they offer a much finer filtration of suspended particles and dirt.
• Micron rating: 5 Micron. Dimensions: 9.75" x 2.5"
• Dimensions: 9.75" x 2.5"
• Lifetime: Replace every year, depending on the water quality.

This filter is wrapped and sealed and meets NSF Standards and Regulations. Filter will fit any Residential Reverse Osmosis Unit that features standard 10” filter housing

 

Stage 3-

• Reverse osmosis under counter sink replasement filters has a - 50 Gallon per Day NSF Certified Thin Film TFC Membrane is the main component of GE Pro Elite RO-450 Reverse Osmosis Unit.
• Made with 100% Organic fine thin film flat sheet
• 99% reduction rate of bacteria, pesticides, herbicides, and heavy metals from tap water.
• GE Pro Elite RO-450 reverse osmosis membrane has The micron rating of a thin film less than 1/10000th of a Micron
• which is 620,000 Times Finer Than A Human Hair  2,500 Times smaller than bacteria 20 Times smaller than any virus

Product Features:

• 25-50 Gallons Per Day (15.8 Liters per Hour) Capacity
• 99% Stabilized Salt Rejection (Minimum Rejection 97%)
• NSF/ANSI Standard 58 listed

 

Operating Conditions
Performance specifications based on 500 ppm tap water, 50psi (0.35 MPa) applied pressure, 77°F (25°C) feed water temperature, feed water pH 7-8 and 15% recovery. Element permeate flow may vary ± 15%.

• Maximum operation pressure: 125 psi (0.86 MPa)
• Maximum feed flow rate: 2 gpm
• Maximum operating temperature: 113° F (45° C)
• Maximum feed water turbidity: 1 NTU
• Maximum feed water SDI (15min): 5
• Chlorine tolerance: 0
• Feed water pH range: 2-11
• Minimum brine flow to permeate flow ratio: 4:1